+34 978 11 00 61
Sevasa:       Sevasa Technologics:   


  • Colours: low-iron, clear, bronze, grey, green, blue and ultra-grey.
    Thickness: 3, 4, 5, 6, 8, 10, 12 mm and laminated. Inches: from 1/8″ to 1/2″.
    Size: Standard 2250×3210 mm (88″x126″ in) / 2400x3210mm (94 1/2″x126″).
    (Other sizes, please consult).
    Weight: 2.5kg/m2 per mm thickness.
    Base: float glass standard UNE-EN 572-2, mirror standard UNE EN 1036 quality and resistance to corrosion.


Sevasa General Catalogue

SatenDecor Evolution Add'l brochure

Sizes Chart

SatenDecor® EVOLUTION Hermes

HERMES-Double side geometric design glass with 3D effect. New satin glass.

It combines satin on transparencies on both sides, creating a three-dimensional effect.

SatenDecor® EVOLUTION is a new production process for acid-etched decorated glass:

  • Improved stain resistance. / Better easy of cleaning.
    / Improved consistency on etching. / Better pattern definition and resolution.

Increased variety of reproducible designs:

  • Infinite in one-tone patterns. / New tone-on-tone effect. / Ability to produce larger motives. / Easing customization.

New larger measures available.

SatenDecor® is a trademark from SEVASA.


  • Doors, screens, dividers, shower stalls, bedrooms, offices.
  • Outdoor architecture, curtain walls, handrailings.
  • For offices, homes, business premises, hotels, schools, etc.


  • Highly fingerprint and stain resistant. Very easy to clean.
  • It is resistant to damp and can be exposed to both the sun and artificial light. Unchanged by time.
  • High large-scale production capacity. Consistent quality, without irregularities.
  • Easy transformation: cutting, bevelling, curving, drilling, laminating, tempering and suitable for double glazing.
  • Well-known international brand and guality proven reliability.
  • SEVASA holds Environmental Safety ISO 14001 certification.


  • Store the glass in a dry place to prevent oxidation and protect from dust.
  • Clean with clean water. Do not use abrasive products.
  • Just like any other satin, care must be exercised when handling, particularly the matt face. Place the glass on a clean cutting table to protect the satin. It is recommended you position the glass satin side up on the cutting table.
  • In wet zones (shower screens, shower cabins, etc.) you are advised to install the glass with the treated side outwards: the glass will be transparent until it dries.
  • When SatenDecor® glass is installed correctly, no specific precautions are required. SEVASA satin is untouched by time and it does not degrade or blur.

Optional Services

Customised Production: specific acording to your design, production, services and logistic needs.

Does your project or client require a bespoke design?

¿Have you been unable to find glass with the ideal technical or design characteristics?

¿Have you found a design you like but which needs modification to fit into your project?

With SEVASA your idea materialises into a distinguished project?