info@sevasa.com 938 28 03 33

Characteristics

  • Colours: low-iron, clear, bronze, grey, green, blue and ultra-grey.
    Thickness: 3, 4, 5, 6, 8, 10, 12 mm and laminated. Inches: from 1/8″ to 1/2″.
    Size: Standard 2250x3210mm (88″x126″) /up to 2400x3210mm (94 1/3×126 1/3″). Other sizes, please consult.
    Weight: 2.5kg/m2 per mm thickness.
    Base: float glass standard UNE-EN 572-2, mirror standard UNE EN 1036 quality and resistance to corrosion.

Downloads

SatenDecor Evolution Brochure

Sevasa General Catalogue

SatenDecor® EVOLUTION GRID-T (Grid Collection)

GRID T – Transparent with satin line decorated glass. Bidirectional.

GRID is the common geometric base of this bidirectional collection: it can be installed vertically and horizontally interchangeably, for a better glass profit.

Transparent T version, available in 2 sizes.
GRID 24-T, 24×24 cm squares (9 1/2″).
GRID 6-T, 6×6 cm squares (2 1/3″).

  • Design by Camilla Brunelli, a young italian designer specializing in product design and surfaces. Exhibits in Milano, New York, Frankfurt, Berlin and Helsinki.

SatenDecor® EVOLUTION is a new production process to decorate glass: Improved stain resistance, improved consistency on etching, better easy of cleaning, better pattern definition and resolution, increasing the ability to produce new designs, such as the tone-on-tone, bigger larger motives and easing customization.

SatenDecor® is a trademark from SEVASA.


Applications

  • Doors, screens and dividers. Shower stalls. Furniture in general.
  • Exterior architecture, curtain walls, handrails.

Advantages

  • Highly fingerprint and stain resistant. Very easy to clean.
  • It is resistant to damp and can be exposed to both the sun and artificial light. Unchanged by time.
  • High large-scale production capacity. Consistent quality, without irregularities.
  • Easy transformation: cutting, bevelling, curving, drilling, laminating, tempering and suitable for double glazing.
  • Well-known international brand and guality proven reliability.
  • SEVASA holds Environmental Safety ISO 14001 certification.

Recommendations

  • Store the glass in a dry place to prevent oxidation and protect from dust.
  • Clean with clean water. Do not use abrasive products.
  • Just like any other satin, care must be exercised when handling, particularly the matt face. Place the glass on a clean cutting table to protect the satin. It is recommended you position the glass satin side up on the cutting table.
  • In wet zones (shower screens, shower cabins, etc.) you are advised to install the glass with the treated side outwards: the glass will be transparent until it dries.
  • When SatenDecor® glass is installed correctly, no specific precautions are required. SEVASA satin is untouched by time and it does not degrade or blur.

Optional Services

Customised Production: specific acording to your design, production, services and logistic needs.

Does your project or client require a bespoke design?

¿Have you been unable to find glass with the ideal technical or design characteristics?

¿Have you found a design you like but which needs modification to fit into your project?

With SEVASA your idea materialises into a distinguished project?