> Does SEVASA produce transparent etched glass products?

> Can a SEVASA Antiscratch glass be scratched/stained?
> Why you should use LuxRaff® Antiscratch in kitchens and bathrooms?
> What glass thickness should be used for floors, stairs or other trafficable areas?
> Can I choose between transparent or translucent floor glass?
> Could it be that the more cleaning product I use the dirtier it looks?
> Does the translucent effect disappear when wet?
> Does humidity affect etched glass?
> Can I process large panels of glass?
> Why use SEVASA acid-etched satin glass?
> I am a specifyer, can you send me your price list?


Does SEVASA produce transparent etched glass products?

Yes. The acid-etching/engraving process used by SEVASA involves transforming the surface of the glass, producing an etched or engraved glass which can be translucent as well as transparent, depending on the technique and technology used.


If you need other applications which require transparency and you cannot find them using our product search engine, ask us directly at SEVASA. Remember we have other products and we provide customised production adapted to specific needs.


Back to top


Can a SEVASA Antiscratch glass be scratched/stained?

SEVASA Antiscratch, LuxRaff® and LuxFine® glass products are highly resistant to scratches and stains, up to level 6 of the MOHS scale and more than four times better than standard acid-etched mattified glass products.


When in contact with abrasive materials or metal utensils, its hardness sometimes causes residue from the utensil itself to be left on the surface. It resembles a scratch, but it is actually the deterioration of that material and it disappears when it is cleaned with a cloth or a little water.


You really need to intend to scratch a SEVASA Antiscratch surface to do so, and you would need to use abrasive tools or chemical products to achieve this. It is obviously glass, and although it is tempered, it can break and deteriorate with the use of machinery or inadequate handling.


With regard to stains, it is obvious that if something falls on the glass, it will get dirty and can sometimes look stained. What is different about Antiscratch products is that this dirt will disappear with a simple clean, while it remains on other mattified glass surfaces.


There are other brands falsely claim to have this scratch resistance and stainless characteristics. The difference between these products is enormous. Some have been tested by SEVASA and have only achieved level 2 of the previously mentioned MOHS Scale. Ensure and demand that your supplier provides with the certification guarantee of the features it offers.


Back to top


Why you should use LuxRaff® Antiscratch in kitchens and bathrooms?

The glass products that are new highly resistant to scratches and stains in the LuxRaff® Antiscratch range prove that the traditional idea that “glass is delicate” can be wrong.


With a score of 6 of MOHS Surface Hardness scale (higher than other materials normally used for kitchen work surfaces such as marble or granite and equal to the quartz used by prestigious commercial brands), using SEVASA glass for these applications has many advantages:



Back to top


What glass thickness should be used for floors, stairs or other trafficable areas?

SEVASA manufactures CriSamar® STEP and LuxRaff® Antiscratch non-slipping floor glass in sheets. They offer the technical characteristics of resistance, anti-slip properties and optimal certifications for different architectural applications, whether demanded by law or due to the architect’s safety requirements.


However, data such as the thickness of the glass panel should be calculated depending on the dimensions, type of support or anchoring, the use it will be given, its location, frequency of use, etc and the transformation of the SEVASA trafficable non-slip floor glass.


In these cases, and in light of the special precautions and specifications needed, the transformation and installation should be agreed by the architect and glazier according to their experience and criteria.


Back to top


Can I choose between transparent or translucent floor glass?

Yes. SEVASA provides different finishes for anti-slip floor glass, all of which have different levels of anti-slip properties:



If there are any limitations, these will be determined by the anti-slip safety requirements of the project manager or the glazier, according to the type of application, location, national laws of the country of installation, etc. and may limit the options. For example: The models with transparent engravings tend to provide less anti-slip resistance.


Back to top


Could it be that the more cleaning product I use the dirtier it looks?

Yes. Some domestic cleaning products contain additives such as shine boosters, colorants, etc which can leave residue on satin etched glass. In these cases, adding more product only makes the situation worse.


One of the features of SEVASA glass products is that once they have been fitted, they do not require any special maintenance. Minimal maintenance which involves cleaning with neutral soap, or just water, is enough to maintain its original appearance.


Back to top


Does the translucent effect disappear when wet?

Temporarily yes, until it dries.


All mattified glass losses its opaque characteristic while it is in contact with water and until it is dried.


This is why the etched side is placed outwards when located in bath areas, showers screens and cabins.


The same thing happens with curtain walls or glass covers when the mattified side is facing outwards and it rains. However, some architects have made the most of this characteristic with the aim of obtaining more light on rainy days and providing their projects with a more dynamic and differentiated appearance.


Back to top


Does humidity affect etched glass?

Like all glass, while it is stored the humidity in the air can get between the stacked panels and attack the surface with the sodium hydroxide which is generated if it remains on the panel for too long.


To preventing this, regular cleaning is recommended. If the glass gets wet, it must be unpacked, dried and stored with separators to allow air between the panels.


This will not ordinarily happen to glass that has been installed, because air flow, rain or cleaning will prevent it.


Back to top


Can I process large panels of glass?

Yes, exactly the same as all other sizes. The features of all the Large Format products (Jumbo 6 metres) of SEVASA are exactly the same. They can be laminated, tempered, curved, etc.


However, the architect and designer should take into account the type of processing required and check limitations with the transformer with regard to the type of machinery, transport possibilities, installation, etc. For example, not all transformers are equipped to work with six-metre panels.


Back to top


Why use SEVASA acid-etched satin glass?


Back to top


I am a specifyer, can you send me your price list?

SEVASA specialises in etching and engraving complete sheets of flat glass, carrying out technical and industrial high quality production, which is then served to Professional Glaziers for further transformations and installation.


If you are an architect, constructor, interior designer or any other type of advisor, you must establish the type of transformation required for the glass according to your project. The best way to value an estimate is to contact your glazier directly and order the SEVASA glass product you desire.


Ask us for information on the features of the SEVASA satin crystal glass. We can advise you on the correct choice of glass and your recommendations if you provide us with the details of your project (see section “Specification / Choosing the right glass”).


Back to top

Send Web


Successfully sent